Anycubic Photon Notes
Print Settings
Slice in Chitubox.
GOOD
| | | | Bot | Norm | Bot | Light |
Mfg | Resin | Color | Res | Layers | XP | XP | Off | Notes |
Elegoo | ABS-Like | White | 0.05 | 6 | 8s | 60s | 1 | Calibrated w/ AltLabs Resin XP Finder card. Same as Elegoo recommendation. |
BAD
| | | | Bot | Norm | Bot | Light |
Mfg | Resin | Color | Res | Layers | XP | XP | Off | Notes |
Elegoo | ABS-Like | White | 0.05 | 10 | 11s | 90s | 1 | Common recommendation for this resin. But it's over-exposed, the part has poor dimensional accuracy. |
Tools
Trim edges of print to improve dimensional accuracy
Calibration card to work out optimal exposure settings